TC Helicon Ditto Mic Looper
DITTO MIC LOOPER lets you go from idea to performance with ease in a flash. One knob, two buttons – it couldn’t be simpler! With its superior audio quality, unlimited overdubs and Undo/Redo, DITTO MIC LOOPER is the essential choice for looping vocals and instruments.
New: Intelligent Mic Gain
Using DITTO MIC LOOPER is exactly like plugging your mic directly into the PA and you only need to set input gain once – at the mixer. No more trial-and-error tinkering to find the optimal balance between input gain on your effects unit and the mixing desk.
It’s this Simple...
• Press LOOP to record. Press again to play the loop. Repeat for endless overdubs. Hold to undo/redo latest overdub.
• Press STOP to stop all loops, press again to restart play from the beginning – or hold it for a quick, noiseless erase.
|Size||Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)
|Weight||Weight: 0.92 lb. (0.42 kg)|
|Construction||Two part dies cast metal
|Analog Inputs||Input Connector: XLR Female, balanced
Input Impedance: 2.7 kOhm balanced
Maximum Input Level: -1 dBu
Signal to Noise Ratio: 112 dB A-weighted
Phantom Power: 32V (always on)
|Analog Outputs||Output Connector: XLR Male, balanced
Output Impedance: 250 Ohms balanced
Maximum Output Level: -1 dBu
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
|Control||USB for firmware and control
Mic Control using TC Helicon MP-75 Microphone or Sennheiser e835 FX mic
Safety And Regulations
|Power||Power Supply (Supplied): 12V .4A
Power Consumption: 5.6W
|Safety||EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
|Environment||Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing
|What's in the box?||Region specific power supply